2–Driver Installation and Configuration
VMware Driver Installation and Configuration
26
BK3254601-00 C
Before you can use the script, you must download the appropriate VI SDK from
VMware:
For Perl VI SDK, download vSphere SDK for Perl:
http://www.vmware.com/support/developer/viperltoolkit/
For PowerShell, download vSphere PowerCLI:
http://communities.vmware.com/community/vmtn/vsphere/automationtools/
powercli
After downloading and installing the SDK and the registration script, follow the
VMware instructions to unregister the plug-in. For example, the Perl unregister
command is:
perl registerPlugin.pl --server="127.0.0.1"
-username="
administrator
" --password="
password
"
--key="com.qlogic.QLogicAdapterVIPlugIn" --action="remove"
To log into the vCenter Server, replace
administrator
and
password
with
the correct information.
Uninstalling the QConvergeConsole VMware vCenter Server Plug-in
To remove the QConvergeConsole VMware vCenter Server Plug-in:
1.
In the Windows Control Panel, select
Add or Remove Programs
.
(Windows Server 2008 or later only: select
Programs and Features
.)
2.
In the Add or Remove Programs dialog box, select the QConvergeConsole
VMware vCenter Server Plug-in, and then click
Change/Remove
.
3.
To remove the plug-in, follow the instructions in the QConvergeConsole
VMware vCenter Server Plug-in installer.
Installing the QLogic Adapter CIM Provider
This section describes how to install, start, and remove the QLogic Adapter CIM
Provider for VMware ESXi. Because there are multiple zip packages, ensure that
you pick the zip package that matches your environment: ESXi 6.5 and ESXi 6.0
U2.
NOTE
The QLogic Adapter CIM Provider for VMware ESXi was generated as a VIB
file. A VIB contains the complete set of files and binaries required to install
the provider on VMware ESXi. The file
offline-bundle.zip
contains
the VIB and the necessary metadata to install the provider on VMware ESXi.
