Qlogic QLE2740L-DEL, User Manual

Page: 95 / 135

3–Fibre Channel Configuration
Running Diagnostics—Fibre Channel Ping and Trace Route
80 BK3254601-00 C
6. In the Target Selection dialog box, select the target to run the trace route.
7. Click Trace .
Figure 3-32 shows an example.
Figure 3-32. Running Fibre Channel Trace Route from QConvergeConsole GUI
The Fibre Channel trace route output from QConvergeConsole GUI shows a
symbol of a red payload that starts from the host. The travel across the route is
also highlighted in red. The payload enters and exits from the appropriate port on
each switch as it traverses the path until it reaches the selected target.
The results appear as a success message output from the following:
 QConvergeConsole GUI
 QConvergeConsole CLI
 Diagnostics area
NOTE
You can also execute the CT FTR test.