A–Troubleshooting
Troubleshooting with a Diagnostic Port (D_Port)
104
BK3254601-00 C
To disable D_Port diagnostic mode:
From the Brocade Fibre Channel 16G or 32G switch, issue the following
commands:
#
portdisable
<port_num>
#
portcfgdport ––disable
<port_num>
#
portenable
<port_num>
The D_Port test stops.
Checking D_Port Results from a Brocade Fibre Channel 16G
or 32G Switch
To view the D_Port test results from a Brocade Fibre Channel 16G or 32G
switch:
1.
To get the port number, issue the
switchshow
command:
#
switchshow
The following example output identifies port 17:
17
17
011100
id
N16
Online
FC D-Port Loopback->Port 17
2.
Issue the
portdporttest
command as follows:
#
portdporttest --show <port_num>
For example:
#
portdporttest --show 17
Following is an example output for this command.
portdporttest --show 17
D-Port Information:
===================
Port: 17
Remote WWPN: 21:00:00:0e:1e:11:4a:31
Mode: Automatic
No. of test frames: 1 Million
Test frame size: 1024 Bytes
FEC (enabled/option/active): Yes/No/No
CR (enabled/option/active): Yes/No/No
Start time: Thu Aug 14 01:45:37 2014
End time: Thu Aug 14 01:47:40 2014
Status: PASSED
==============================================================================
Test Start time Result EST(HH:MM:SS) Comments
