3–Fibre Channel Configuration
Configuring and Verifying FA-BLD
69
BK3254601-00 C
3.
In the content pane on the right, click the
Parameters
tab.
4.
On the Parameters page, click the
HBA Parameters
tab.
5.
Select the
Enable HBA Port BIOS
check box.
6.
Click
Save
.
shows an example.
Figure 3-23. Enabling Host Bus Adapter Port BIOS
To enable fabric-assigned boot LUN:
1.
In QConvergeConsole GUI, select the
Host
tab in the left pane.
2.
In the system tree, expand the adapter node and then select a port node.
3.
In the content pane on the right, click the
Parameters
tab.
4.
On the Parameters page, click the
Boot Device Selection
tab.
5.
Select the
Enable Fabric Assigned Boot LUN
check box.
6.
Click
Save
.
