3–Fibre Channel Configuration
Setting an FA-PWWN
65
BK3254601-00 C
After refreshing the Brocade
®
switch, the Port Info page shows the
Port
Name
as shown in
Figure 3-18. New FA-PWNN Port Name in GUI
Setting FA-PWWN with QConvergeConsole CLI
To set the FA-PWWN from the adapter using QConvergeConsole CLI:
1.
In interactive mode of QConvergeConsole CLI, select
Main Menu
, and then
click
Adapter Configuration
.
2.
Select
HBA Parameters
.
3.
Select the appropriate port.
4.
Select
Configuration HBA Parameters
.
5.
Select
Enable Fabric Assign WWN
.
6.
On the
Enable Fabric Assign WWN Menu
, select
1: Enable
.
7.
Select the option to
Commit Changes
.
The following shows an example of setting the FA-PWWN:
HBA Desc.
: QLE2742 QLogic 2-port 32Gb Fibre Channel Adapter
FW Version
: 7.04.00
WWPN
: 21-00-00-OE-1E-11-4A-38
WWNN
: 21-00-00-OE-1E-11-4A-38
Link
: Online
===============================================================
1: Connection Options
2: Data Rate
3: Frame Size
4: Enable HBA Hard Loop ID
5: Hard Loop ID
6: Loop Reset Delay (seconds)
