3–Fibre Channel Configuration
Setting an FA-PWWN
64
BK3254601-00 C
Setting FA-PWWN with QConvergeConsole GUI
To set the FA-PWWN from the adapter using QConvergeConsole GUI:
Before setting the FA-PWWN, the port name appears on the Port Info page
as shown in the example in
.
Figure 3-17. Before Setting the FA-PWWN in the GUI
1.
In the QConvergeConsole GUI tree pane on the left, select an adapter,
expand the adapter node, and then select a port.
2.
In the content pane on the right, click the
Parameters
tab.
3.
On the Parameters page, click the
Advanced HBA Parameters
tab.
4.
Under
Configure Port Advanced Parameters
, select the
Enable Fabric
Assigned WWN
check box, and then click
Save
.
