A–Troubleshooting
Troubleshooting with a Diagnostic Port (D_Port)
105
BK3254601-00 C
==============================================================================
Electrical loopback 01:46:08 PASSED --------
----------
Optical loopback 01:46:54 PASSED --------
----------
Link traffic test -------- SKIPPED --------
----------
==============================================================================
Roundtrip link latency: 157 nano-seconds
Estimated cable distance: 3 meters
Buffers required: 1 (for 2112 byte frames at 16Gbps speed)
Verifying D_Port Mode with QConvergeConsole GUI
To verify D_Port mode in QConvergeConsole GUI:
1.
In the QConvergeConsole left pane, click the
Host
tab.
2.
On the Host page, expand a 2700 Series Adapter to view its port nodes.
If a port is in D_Port mode, the port node specifies
Loop Down, Diagnostic
Mode
.
Figure A-3. D_Port Mode in QConvergeConsole GUI
