Qlogic iSR6142 User Manual Download

Page: 122 / 172

A – Log Messages
Informational Log Messages

A-4

SN0054660-00 A

iSCSI Driver

The following informational log messages are common to both iSCSI ports: 1
(GE1) and 2 (GE2). The messages are listed in

Table A-2

and described following

the table. Log messages beginning with #0 denote iSCSI port 1 (GE1) and log
messages beginning with #1 denote iSCSI port 2 (GE2).

1700

iSCSI connection closed.

1715

Remote system connection established using DDB d:d.

1738

Re-enabling compression.

2051

TRB freed, State xx, Abort Reason d, Flags xx.

Table A-2. iSCSI Driver—Informational Log Messages

Log Message

No.

86343

#%d: QLPortUp: Set link configuration 0x%x

327

86347

#%d: QLDisable: Restart RISC

331

86349

#%d: QLEnable: Restart RISC to update EEPROM

333

86352

#%d: QLPortDown: Set link configuration 0x%x

336

86874

#%d: QLIsrDecodeMailbox: Link up

858

327

iSCSI port enabled, port up.

331

Restart iSCSI processor (RISC).

333

EEPROM updated, restart iSCSI processor (RISC).

336

iSCSI port disabled, port down.

858

Link up reported by iSCSI processor for GE1 or GE 2.

Summary of Contents for iSR6142













































































































































































Search results

Summary of Contents for iSR6142

Reviews:

Related manuals for iSR6142

Brands by name

Popular brands

Qlogic iSR6142, User Manual

Search results

Summary of Contents for iSR6142

Reviews:

Related manuals for iSR6142

Brands by name

Popular brands