Qlogic iSR6142, User Manual

Page: 115 / 172

5 – Configuring CHAP
Discovery Session—Uni-directional CHAP
SN0054660-00 A 5-3
A
Discovery Session—Uni-directional CHAP
To program a single-direction CHAP during a discovery session:
1. Do not enable CHAP on the iSCSI port.
2. Check to see if the initiator exists on the discovered iSCSI initiators list:
„ If the initiator is not part of the discovered iSCSI initiators list, then go
to the wizard menu and select Add Initiator Wizard .
„ If the initiator is part of the discovered list, then go to Step 6 .
3. Type the IQN name string.
4. Select Enable Chap .
5. Create a CHAP secret (for example, secret_initiator ).
6. Go to the MS Initiator and perform the following steps:
a. Click Discovery .
b. Click Add .
c. Enter the address of the iSCSI port of the bridge.
d. Click Advanced .
e. Click Chap Login Information .
f. Type the secret ( secret_initiator ) you created in Step 5 into Target
Secret .
7. Click OK .
8. Click OK . The initiator completes discovery.
Normal Session—Bi-directional CHAP
To program bi-directional CHAP during a normal session:
1. On the bridge, enable CHAP for the iSCSI presented target.
2. Select the presented target on the left column of the SANsurfer Router
Manager.
3. Click Information .
4. Select Enable Chap .
5. Type a secret in the Chap secret dialog box (for example, secret_target ).