4 – Using the Wizards
Map Local Initiator/Target Wizard
SN0054660-00 A
4-13
A
6.
Complete the wizard:
a.
If you want to reboot the system now, click
Yes
. Otherwise, click
No
.
b.
Click
Finish
.
Map Local Initiator/Target Wizard
The Map Local Initiator/Target Wizard provides a set of dialog boxes that walk you
through the steps required for mapping a local initiator to a local target.
You can start this wizard at any time by selecting
Map Local Initiator/Target
Wizard
from the
Wizards Menu
or from the
Action Menu
.
When the Map Local Initiator/Target wizard launches, the
Select an Initiator
dialog box displays a list of locally connected initiators (FC or iSCSI), as shown in
Figure 4-16
.
Figure 4-16 Initiator Selection Dialog Box
To map a local target to a local initiator:
1.
Select the check box next to the initiator you want to map, then click
Next
.
NOTE:
The new firmware will not take effect until the system is rebooted.
Summary of Contents for iSR6142
