Qlogic iSR6142, User Manual

Page: 114 / 172

5 – Configuring CHAP
Discovery Session—Bi-directional CHAP
5-2 SN0054660-00 A
S
Discovery Session—Bi-directional CHAP
To configure a bi-directional CHAP during a discovery session:
1. On the bridge, enable CHAP for the iSCSI port.
2. Select the port in the left column.
3. Click Advanced Configuration .
4. Select Enable Chap .
5. Type a secret in Chap secret (for example, secret_port ).
6. Check to see if the initiator exists on the discovered iSCSI initiators list:
„ If the initiator is not part of the discovered iSCSI initiators list, then go
to the wizard menu and select Add Initiator Wizard .
„ If the initiator is part of the discovered list, then go to Step 10 .
7. Type the IQN name string.
8. Select Enable CHAP .
9. Create a CHAP secret (for example, secret_initiator ).
10. Go to the MS Initiator and perform the following steps:
a. Click General .
b. Click Secret (in the middle of the screen).
c. If this is the first time you are setting secrets, reset all secrets.
d. Type the CHAP secret ( secret_port ) that you created in Step 5 .
11. Click Discovery .
12. Click Add .
13. Enter the address of the iSCSI port of the bridge.
14. Click Advanced .
15. Select Chap Login Information .
16. Type the secret ( secret_initiator ) that you created in Step 9 into Target
Secret .
17. Select Mutual Authentication .
18. Click OK .
19. Click OK . The initiator completes discovery.