Qlogic iSR6142, User Manual

Page: 83 / 172

4 – Using the Wizards
Add Remote Router Wizard
SN0054660-00 A 4-25
A
After completing the UnMap Local Initiator/Target Wizard you can verify the
unmapping by selecting the Initiator in the system tree under
Discovered iSCSI
Initiators. Then select Local Presented Devices .
For the example shown in Figure 4-28 , an iSCSI initiator was unmapped from an
FC target.
Figure 4-28 Discovered iSCSI Initiators - Local Presented Targets
Add Remote Router Wizard
The Add Remote Router Wizard provides a set of dialog boxes that walk you
through the steps required for assigning a remote router to your local router as a
peer.
You can start this wizard at any time by selecting Add Remote Router Wizard
from the Wizards Menu or from the Action Menu .
When the Add Remote Router Wizard launches, the Remote Router’s IP
Address dialog box requests the remote router’s IP address, as shown in
Figure 4-29 .