QIAcube Connect Safety Instructions and Quick Start Guide 04/2019
51
To define WLAN/Wi-Fi (WPAv2 only) setting
11a.
Press the
WLAN
tab in the QIAcube Connect App to configure the Wi-Fi
connection.
11b.
Scan to search for available Wi-Fi networks.
11c.
Select the appropriate Wi-Fi network and enter the password. The server, SSID and
security type fields are automatically filled.
11d.
Connect and proceed to
step 12
.
Note
: Q-Base supports connecting to Wi-Fi networks with visible SSIDs only.
To define LAN (Static IP and DHCP) setting
11e.
Select the
LAN
tab from the
Configuration
menu, enter the local network settings
and set up the LAN Network
.
Static IP Manual
is selected by default.
Note
: When using DHCP-configured LAN, the network settings for Q-Base will be
obtained automatically from the DHCP server. No further input is required.
Note
: You might need the help of an IT professional to enter detailed network
settings.
12.
On the QIAcube Connect instrument screen, select the
Configuration
menu and then
select the
Q-Base
tab.
13.
Check the
Communication Enabled
box.
14.
Enter the Q-Base IP address in the
Q-Base URL
field on the QIAcube Connect
touchscreen. The IP address is shown in the QIAcube Connect App in the
Configuration
menu under the
Q-Base
tab. You can also scan the 2-D barcode.
Note
: The test will fail if you press
Test
before pressing
Finish Configuration
on the tablet.
15.
To continue, select
Apply
.
16.
Press
Finish Configuration
.
Note
: If you do not press
Finish Configuration
, a connection will be established after
10 minutes.
17.
Optional
: To test if the connection is successful, wait for 10 minutes and then press
Test
.
18.
Reboot the QIAcube Connect instrument.
