33
Note, that all current settings and calibration data are
automatically saved when closing the
Pyro Oxygen Logger
software (by clicking on the cross in the upper right corner of the
main window), and are automatically loaded again at the next
startup.
The button
Flash Logo
causes a short flashing of the illuminated
logo of the
FireStingO2
meter. Several
FireStingO2
meters
can be
connected to the PC in parallel and multiple measurements can be
performed by opening the
Pyro Oxygen Logger
software a number
of times corresponding to the number of connected
FireStingO2
meters. The different windows operate completely independent of
each other and are assigned to exactly one
FireStingO2
. This
allows measurements in different setups at the same time. The
flashing of the logo (for ca. 1 sec after pressing the
Flash Logo
button) can help to assign a specific logger window to the
corresponding
FireStingO2
meter (more details in chapter 0).
Clicking on
Raw Data
opens a pop-up
window
FireSting Raw Data
which is
described in chapter 6.4.
A
Measurement
is started by clicking on
the measurement start button (
MSB
) on
the right-hand side. The arrow in the
button turns from dark green to light
green indicating that a measurement is
in progress. Clicking again on it will stop
the measurement.
The mode of
Measurement
can be
chosen as
single data point
acquisition,
