30
The unit of the x-axis can be changed with the selector
Time Scale
(using the arrows or clicking onto the field). The time scale can be
displayed in Seconds (s), Minutes (min), Hours (h), Relative Time
(HH:MM:SS), Absolute Time (HH:MM:SS), Absolute Time and Date
and in Data Points.
The scales of the x-axis (Time) and of the y-axes, on the left side for
oxygen and on the right side for temperature (if a temperature
sensor is connected and activated), can be adjusted by clicking on
Adjust Scales
, opening a pop-up window:
The upper (
Maximum
) and
lower limits (
Minimum
) and
the
Increment
of the
Y Scales
Oxygen
and
Temperature
and of the
X Scale (Time)
can
be changed by clicking on the
respective selector or by
double-clicking directly onto
the field and entering the
values manually (changing
these
parameters
will
automatically de-activate the
autoscaling). Autoscaling for all axes can be activated with the
Autoscale
button. The arrow in the button turns from dark green
to light green indicating that Autoscale is activated. By default
only
the y-axis oxygen is in Autoscale mode.
The button
Clear Graph
offers the options to clear only the graph
of one channel, or to clear the graphs of all channels (i.e. the
graphs in all other panels will be also cleared). Note, that this will
not affect the saved data in the data file.
All data recorded can be displayed in the chart recorder by moving
the bar along the scroll bar (
SCB
). Switching off the
Autoscroll
