HYD-2100.
CNC Plasma&Flame Cutting Control System
Edition of 28.07.2015
8
www.purelogic.ru
8 (800) 555 63 74
• [STOP] ([F10]): Parking, the system can suspend all ongoing actions.
• [F1]: The torch move back along the cutting path (I / O port closed).
• [F2]: The torch forward along the path (I / O port closed).
• [F3]: Return to the starting point of cutting torch, i.e. the starting point of the current work piece.
• [F4]: Decrease the cutting speed, each decrease of 1% click rate.
• [F5]: Increase the cutting speed, each 1% increase in click rate.
• [F6]: Reduce the preheat time, skip the remaining preheat time, and the system automatically records preheat
time.
• [F7]: Increase the preheat time once 15 seconds.
• [F8]: When the system is suspended, for selecting perforation point; when the system begins to move, for the
dynamic amplification.
• Four direction keys (Up, down, left and right): When the gun through, manually move the torch.
SPEED REGULATION
Normal Speed Regulation
In automatic operation, or when the system is suspended, in the cutting interface the system can regulate speed.
The operation panel, press [F5] or [PRE], increasing at a rate per click rate of 1%. Hold the [F5] or [PRE], then the
rate will continuously increase to 100%. Increased to 100%, the speed is «common parameters» in the «cutting
speed.»
The operation panel, press [F4] or [NEXT], each click rate of speed reduced by 1%. Hold the [F4] or [NEXT], then
the rate will be continuously reduced to1%. Reduced to a very slow speed when running in order to ensure the
accuracy requirements, the system may auto-adjust the speed based on the size of «horizontal pulses» and
«vertical pulses», actual speed may not be the «cutting speed» of 1% is greater than 1%.
Quick Speed Regulation
In automatic operation, or when the system is suspended, in the cutting interface the system can carry out quick
speed regulation.
In the cutting interface, on the operation panel, press the number keys [1] - [9], the speed will quickly adjust to
the corresponding percentage figures 10 times, for example press [3], adjust to 30% of the speed limit you have
set, press [8], adjust to 80% of the speed limit you have set.
FORWARD
In the automatic function interface, press key [F1], the machine start to move without real cutting. The process
does not include any ignition, perforation and any other I/O working. The machine just moves the torch according
to the graphic figure.
Automatic operation index
Cutting
Interface
F1
Backward
F2 Forward
F3 Back to
reference
F4 Speed
Down
F8 Jump to
pierce
F5 Speed
Up
F6 Preheat
Down
F7 Preheat
Up
