HYD-2100.
CNC Plasma&Flame Cutting Control System
Edition of 28.07.2015
10
www.purelogic.ru
8 (800) 555 63 74
the preheat time and increase cutting efficiency. This function is the commonly-used edge perforation function.
• If press [X], the system considers current point is the paused point, it will continue cutting it. That is, the system offsets the cutting point. When the
cutting machine paused or a power outage, if the cutting tip or steel plate with the pan has been offset, or the user would like to think that is offset
cutting, you can press this button.
• If press [Y], The system only return to the paused point quickly, and then break off. During the cutting process, if discovery cutting torch malfunction,
or other issues, need to move the cutting tip out of cutting region to overhaul. After the maintenance, this key can be pressed. Then return to the paused
point, press the «start» button, the system automatically continues to cutting.
BACK TO REFERENCE FUNCTION
Pause in the processing, if press the [F3], then the
system will prompt.
Press the Enter key, the system will automatically return
to the starting point of the work piece, and then the
system automatically switches to processing the main
interface, and waits for further user action.
F1 Back
F2 Forward
F3 GoBack
F4
SpeedDown
F5 SpeedUp
F6
PreheatDown
F7
PreheatUp
F8
JumptoPierce
FLSK F2500
Version 3.3.71.1
Speed:
00000
File:
SHAPE_43.TXT
Status:
Pause
Current Line/Hole:
00000/00000
+X:500.00 -X:0.00 +Y:500.00 -Y:0.00
00001
:(
TEST PATTERN
)
00002
:G
92
●
Ignition s
●
Lowheat s
●
HighPreheat s
●
Pierce 1 s
●
Pierce 2 s
●
Pierce 3 0.1 s
●
TorchUp s
●
TorchDn s
●
THC En s
●
Exhaust s
Manual
【F】
keepMov StepMov ContiMov
StepDis
【G】
5.00 Flame Cu
【M】
CutSpeed
【X】
1000.00 Kerf
【Z】
1.20
ManualSpeed
【Y】
3000.00 Angle 0.00
Are you sure to return?
ENTER: Sure
ESC: Cancel
F1 Back
F2 Forward
F3 GoBack
F4
SpeedDown
F5 SpeedUp
F6
PreheatDown
F7
PreheatUp
F8
JumptoPierce
FLSK F2500
Version
3.3.71.1
Speed:
00000
File:
SHAPE_43.TXT
Status:
Pause
Current Line/Hole:
00000/00000
+X:500.00 -X:0.00 +Y:500.00 -Y:0.00
00001
:(
TEST PATTERN
)
00002
:G
92
●
Ignition s
●
Lowheat s
●
HighPreheat s
●
Pierce 1 s
●
Pierce 2 s
●
Pierce 3 0.1 s
●
TorchUp s
●
TorchDn s
●
THC En s
●
Exhaust s
Manual
【F】
keepMov StepMov
ContiMov
StepDis
【G】
5.00 Flame Cu
【M】
CutSpeed
【X】
1000.00 Kerf
【Z】
1.20
ManualSpeed
【Y】
3000.00 Angle 0.00
Are you sure to return?
ENTER: Sure
ESC: Cancel
Figure 8. Return reference prompt