HYD-2100.
CNC Plasma&Flame Cutting Control System
Edition of 28.07.2015
24
www.purelogic.ru
8 (800) 555 63 74
05
Manual function
In the automatic interface, press [F7]
(Manual) to enter manual function interface,
shown as Fig. 30.
The speed in the manual status is controlled
by the manual moving parameters. During
the process of fixed moving function, you can
adjust speed by acceleration or deceleration
key. In the manual interface, press numeric
key, the cutting speed changes to ratio which
is 10 times of the corresponding figure of the
speed limit you have set, for example press
[3], change the cutting speed to 30% of the
speed limit you have set, press [8], change
the cutting speed to 80% of the speed limit
you have set.
FIXED MOVING FUNCTION
When you enter into the manual interface, the
default option is continuous moving function.
Press key [F1] to go for the fixed moving
function. At this moment, the system will
move toward the specified direction if any
directory key is pressed, and when the
directory key is released, the system will
stop.
CONTINUOUS MOVING FUNCTION
When in the manual interface, press F2 to enter the continuous-moving function interface. At this moment, the system will move toward the specified
direction if any directory key is pressed and then released, and when the directory key or stop key is pressed the system will stop.
Figure 30. Manual function interface
F1 Mirror
F2 Angle
F3 Array
F4 Scale
F5
SelLinePierce
F6 EditFile F7 Revert
F8 OK
FLSK F2500
Version
3.3.71.1
Speed:
00000
File:
SHAPE_43.TXT
Status:
Pause
Current Line/Hole:
00000/00000
+X:500.00 -X:0.00 +Y:500.00 -Y:0.00
Operate Mode:
PartOption
●
Ignition s
●
Lowheat s
●
HighPreheat s
●
Pierce 1 s
●
Pierce 2 s
●
Pierce 3 0.1 s
●
TorchUp s
●
TorchDn s
●
THC En s
●
Exhaust s
Manual
【F】
keepMov StepMov
ContiMov
StepDis
【G】
5.00 Flame Cu
【M】
CutSpeed
【X】
1000.00 Kerf
【Z】
1.20
ManualSpeed
【Y】
3000.00 Angle 0.00
