Purelogic HYD-2100, Instruction Manual

Page: 11 / 60

HYD-2100. CNC Plasma&Flame Cutting Control System
Edition of 28.07.2015
11
www.purelogic.ru 8 (800) 555 63 74
F1 ShapeLib F2 Files
F3
PartOption
F4 Setups F5 Diagnose F6 ZoonIn
F7
ManualMove
F8 Zero
FLSK F2500
Version 3.3.71.1 Speed:
00000 File:
SHAPE_43.TXT
Status:
Stop
Current Line/Hole:
00000/00000
+X:500.00 -X:0.00 +Y:500.00 -Y:0.00
00001 :（ TEST PATTERN ）
00002 ：G 92
● Ignition s
● Lowheat s
● HighPreheat s
● Pierce 1 s
● Pierce 2 s
● Pierce 3 0.1 s
● TorchUp s
● TorchDn s
● THC En s
● Exhaust s
Manual 【F】 keepMov StepMov ContiMov
StepDis 【G】 5.00 Flame Cu 【M】
CutSpeed 【X】 1000.00 Kerf 【Z】 1.20
ManualSpeed 【Y】 3000.00 Angle 0.00
F1 ShapeLib F2 Files
F3
PartOption
F4 Setups F5 Diagnose F6 ZoonIn
F7
ManualMove
F8 Zero
FLSK F2500
Version
3.3.71.1
Speed:
00000
File:
SHAPE_43.TXT
Status:
Stop
Current Line/Hole:
00000/00000
+X:500.00 -X:0.00 +Y:500.00 -Y:0.00
00001 :（ TEST PATTERN ）
00002 ：G 92
● Ignition s
● Lowheat s
● HighPreheat s
● Pierce 1 s
● Pierce 2 s
● Pierce 3 0.1 s
● TorchUp s
● TorchDn s
● THC En s
● Exhaust s
Manual 【F】 keepMov StepMov ContiMov
StepDis 【G】 5.00 Flame Cu 【M】
CutSpeed 【X】 1000.00 Kerf 【Z】 1.20
ManualSpeed 【Y】 3000.00 Angle 0.00
Figure 9. Main process interface
During the return process, the user can press the «Stop»
button to stop the operation, and can continue to return
operation after pressing of [F3]. Number of back to
reference and stop has no limit.
OXYGEN GAS PREHEAT TIME REGULATION
• In the preheat process, press the START (F9) key to
skip the process of preheat and perforation delay, and
immediately open the perforation signal then begin to
cut.
• In the preheat process, press the stop (F10) key to stop
preheat, waiting for the F9 key is pressed again.
• In the preheat process, press the F6 key then the
preheat time will be reduced to the current preheat time
spent, and skip the process of preheat and perforation
delay, and open the perforation signal then begin to cut.
For example: the original system sets the preheat
time of 60 seconds after null cutting, when preheat
needed, the interface will count down, under normal
circumstances, till 0, the system begins the next step
of cutting, but if the system has the remaining 10
seconds of countdown time, press F6, then the system
immediately stops preheat to begin the next step of
cutting, and records the preheat time of 50 seconds, the
system automatically thinks that users need preheat
time of 50 seconds, the next preheat after the null
cutting when the preheat time becomes 50 seconds.
• In the preheat process, each press the F7 key, preheat time increases by 15 seconds, and the preheat time maintains the increased value.
For example: The original system sets the preheat time of 60 seconds after the null cutting, during the system countdown, each press F7, on the
interface the countdown increases by 15 seconds, and the next time you need to preheat, the initial preheat time be 75 seconds.
PERFORATION POINT SELECTION