Purelogic HYD-2100, Instruction Manual, Page: 25 / 60

HYD-2100. CNC Plasma&Flame Cutting Control System
Edition of 28.07.2015
25
www.purelogic.ru 8 (800) 555 63 74
F1 KeepMov
F2
ContiMove
F3 StepMove
F4
SpeedDown
F5 SpeedUp
F7
Recover
FLSK F2500
Version 3.3.71.1 Speed:
00000 File:
SHAPE_43.TXT
Status:
Stop
Current Line/Hole:
00000/00000
+X:500.00 -X:0.00 +Y:500.00 -Y:0.00
00001: (TEST PATTERN)
00002
：G 92
● Ignition s
● Lowheat s
● HighPreheat s
● Pierce 1 s
● Pierce 2 s
● Pierce 3 s
● TorchUp s
● TorchDn s
● THC En s
● Exhaust s
Manual 【F】 keepMov StepMov ContiMov
StepDis 【G】 5.00 Flame Cu 【M】
CutSpeed 【X】 1000.00 Kerf 【Z】 0.00
ManualSpeed 【Y】 3000.00 Angle 0.00
Input the step distance
5.00
F1 KeepMov
F2
ContiMove
F3 StepMove
F4
SpeedDown
F5 SpeedUp
F7
Recover
FLSK F2500
Version
3.3.71.1
Speed:
00000
File:
SHAPE_43.TXT
Status:
Stop
Current Line/Hole:
00000/00000
+X:500.00 -X:0.00 +Y:500.00 -Y:0.00
00001: (TEST PATTERN)
00002
：G 92
● Ignition s
● Lowheat s
● HighPreheat s
● Pierce 1 s
● Pierce 2 s
● Pierce 3 s
● TorchUp s
● TorchDn s
● THC En s
● Exhaust s
Manual 【F】 keepMov StepMov ContiMov
StepDis 【G】 5.00 Flame Cu 【M】
CutSpeed 【X】 1000.00 Kerf 【Z】 0.00
ManualSpeed 【Y】 3000.00 Angle 0.00
Input the step distance
5.00
Figure 31. Input the fixed length
Fixed-length moving
In the manual interface, press F3 to enter the interface of fixed-
length moving. The system prompts to input the fixed length:
After inputting the fixed length, press ENTER. Press any direction key
and then release, the system will move the fixed length toward the
direction, in the process of moving, when any direction key or stop key
is pressed, the system will stop moving.
BREAKPOINT RECOVERY
To guarantee that the breakpoint could work correctly, you need to
satisfy the following conditions:
1. When the system is paused, the system will automatically regard the
paused point as the current breakpoint and remember it.
2. When the system is in the process of incising, the breakpoint
signal is connected with the urgent alarm input, when power is off,
the system will regard the power-off point as the breakpoint and
remember it.
When you need to process after the breakpoint, after the system
powers on, don’t move the torch, press F7 in the main interface to
enter the manual function interface, then press F7 to recover the
breakpoint. After recovering it, if the torch hadn’t been moved and is on
the position when the power is off, press START keyboard, the system
will process directly.
After the breakpoint is recovered, if the position is off from the original
one, you could move the torch to the original point manually, or
realizing it through choosing rows or numbers.
The method is: choose stopping incising, move the torch to the original
point manually, choose the nearest row through choosing the row
selection (or number selection), press “START”, then the system will
show in Fig. 32.