Pulse Secure MAG2600, Hardware Manual

Page: 72 / 86

MAG Series Pulse Secure Gateways Hardware Guide
© 2016 Pulse Secure, LLC., All rights reserved. 72
Monitoring Components Using LEDs
This table describes the LED functions on the Pulse Secure Gateway components.
LED State Meaning Possible Cause and Corrective Actions
Activity Blinking
yellow The hard drive is being
accessed. Normal condition. No action is required
Off The device is starting up. Normal condition. No action is required.
Alarm Red The device detects a major
alarm, such as overheating. A major alarm indicates a critical situation on the
gateway that requires immediate action. Contact
Pulse Secure Technical Support.
Blinking red The fan has stopped, or the
fan tray has been removed. Ensure that the fan tray is properly inserted into
the back of the chassis. If the fan tray is properly
inserted and is still not functioning, replace the
fan tray. If you do not have a spare fan tray or if
you need more assistance, contact Pulse Secure
Technical Support.
Off The device is starting up. Normal condition. No action is required.
NOTE: When the system is up and running, if the
Alarm LED is off, it indicates that no alarms are
present on the device.
Power Green The device is receiving
power and is functioning
normally. Normal condition. No action is required.
Off The device is not receiving
power Normal condition if the Pulse Secure Gateway is
switched off. No action is required.
If you have not powered off the Pulse Secure
Gateway, verify that the AC power cord from the
power source to the device is not damaged, the
socket is in working condition, and the device has
an AC input voltage between 110 and 240 VAC.