Pulse Secure MAG2600, Hardware Manual

Page: 54 / 86

MAG Series Pulse Secure Gateways Hardware Guide
© 2016 Pulse Secure, LLC., All rights reserved. 54
7. Remove the two rubber strips on the bottom of the MAG2600 and slide the MAG2600 back first into the
MAG-RK1U4 mounting tray. The MAG2600 should be located directly in front of its power supply.
8. Plug the DC connector end of the cable into the power connector on the side of the MAG2600.
9. Use the cable tie holder to secure the cord on to the mounting tray.
10. Repeat Steps 2 through 8 for each MAG2600 you want to mount in this tray.
11. Replace the front panel and tighten the thumbscrews using a number-1 Phillips screwdriver.
12. Gently squeeze the powerclip holder and insert the tips into the holes located on the back of the
mounting tray.
13. Gently lift the powerclip holder and plug the AC adapter into the power connector located on the back
of the MAG2600 power supply.