Psion Teklogix WORKABOUT PRO 7527C-G2, User Manual

Page: 384 / 446

D -10 WORKABOUT PRO
3
with Windows Mobile 6.1 User Manual
Appendix D: Bar Code Settings
EAN 13
Enable ISBT 128
To successfully scan this variation, ““Enable ISBT 128”” must be set to on .
Decode Performance
If this parameter is set to on, one of three decode levels assigned to the ““Decode Perfor-
mance Level”” parameter can be selected.
Decode Perf. Level
This parameter provides three levels of decode performance or ““aggressiveness”” for Code
128 symbols. Increasing the performance level reduces the amount of required bar code ori-
entation –– this is useful when scanning very long and/or truncated bar codes. Keep in mind
that increased levels reduce decode security.
When you double-tap on this parameter, a dialog box is displayed in which you can enter a
decode performance level of between 1 and 3.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.
D.2.7 EAN 13
Enabled
Set this parameter to on to enable ““EAN 13””.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.
D.2.8 EAN 8
Enabled
Set this parameter to on to enable ““EAN 8””.
EAN-8 Zero Extend
When this parameter is enabled, five leading zeros are added to decoded EAN-8 symbols,
making them compatible in format to EAN-13 symbols. Disabling this parameter returns
EAN-8 symbols to their normal format.