Psion Teklogix WORKABOUT PRO 7527C-G2, User Manual

Page: 203 / 446

Chapter 6: Settings
Ports Tab
WORKABOUT PRO
3
with Windows Mobile 6.1 User Manual 185
Data Bits
This parameter determines the number of data bits included in each asynchronous data byte.
Most devices use 8 bit data bytes. Double-tapping on this option displays a pop-up window
in which you can choose either
7 or 8 data bits.
Parity
This parameter determines the type of parity checking used on the data going through the
tether port. Double-tapping on this option displays a pop-up window in which you can
choose the appropriate
Parity .
Stop Bits
This parameter specifies the number of stop bits –– 1 , 1.5 , 2 –– used for asynchronous
communication.
Trigger On Sequence And Trigger Off Sequence
If a SICK scanner connected to the WORKABOUT PRO
3
port requires a serial stream of
data bytes to trigger the scanner on and another to trigger the scanner off , the Trigger On Se-
quence and Trigger Off Sequence parameters allow you to define these serial streams.