Chapter 3: Get To Know WORKABOUT PRO
3
Removing the Battery Pack
38
WORKABOUT PRO
3
with Windows Mobile 6.1 User Manual
3.2.2
Removing the Battery Pack
Refer to “Installing the Battery and Switching the Unit On” on page 12.
3.2.3
Battery Swap Time
Assuming the default power saving parameters and battery reserve level have not been al-
tered, battery swap time is approximately 5 minutes—you will not lose data if the battery is
replaced within this time frame.
To protect data, the safest place to store data is on a SD/MMC memory card or externally to
the device on a USB memory stick or on a PC.
The
Suspend Threshold
feature allows you to determine the battery capacity at which the
hand-held will be shut down. If left at the default value,
Maximum Operating Time
, the unit
will run until the battery is completely empty; the RAM is only backed up for a short period
of time. If you choose
Maximum Back Time
, the hand-held shuts off with more energy left in
the battery so RAM can be backed up for a longer period of time.
(Refer to “Suspend Threshold” on page 167 for details about reserving battery power for
data backup purposes.)
3.2.3.1 Safely Swapping the Main Battery
There are a few steps you need to take to ensure that no data is lost during a battery swap.
First, you need to make certain that the backup battery is holding at least 80% of its charge
capacity. This information is displayed in the
Battery
tab.
•
Tap on
Start>Settings>System
tab
and then tap on the
Power
icon.
Check the
Backup battery
gas gauge to determine the battery charge remaining.
If the backup battery charge capacity is less than 80%:
•
Insert the WORKABOUT PRO
3
in a docking station or cradle to top up the power
supply before removing the main battery from the unit.
Important: Always switch the unit off before opening the battery cover to remove the
battery. When the cover is removed, a power-off switch is automatically acti-
vated and the unit power is switched off; if the battery cover is opened while
the hand-held is still powered on, the unit may reboot. Any active sessions
may be lost.
Keep in mind also that while the battery is being installed, the WORKA-
BOUT PRO
3
backup battery will save the current data for up to 5 minutes.
Summary of Contents for WORKABOUT PRO 7527C-G2
