Psion Teklogix WORKABOUT PRO 7527C-G2 User Manual Download

Page: 270 / 446

Chapter 7: Peripheral Devices & Accessories

Attaching The Pistol Grip

252

WORKABOUT PRO

with Windows Mobile 6.1 User Manual

The pistol grip is attached to the four threaded inserts on the back of the WORKABOUT
PRO

. Four Phillips head screws are provided with this accessory.

•

Position the pistol grip so that it fits snugly over the back of the unit and the holes in the

pistol grip are aligned with the threaded inserts on the back of the WORKABOUT

PRO

•

Tighten the screws to a torque of 3 lbs-in (3kgf-cm) to secure the pistol grip in place.

•

Insert the stylus in the base of the pistol grip.

Note: Prior to installation, make sure the trigger mechanism is securely snapped into the

pistol grip body and that the trigger operates properly.

Summary of Contents for WORKABOUT PRO 7527C-G2































































































































































































































































































































































































































































Search results

Summary of Contents for WORKABOUT PRO 7527C-G2

Reviews:

Related manuals for WORKABOUT PRO 7527C-G2

Brands by name

Popular brands

Psion Teklogix WORKABOUT PRO 7527C-G2, User Manual

Search results

Summary of Contents for WORKABOUT PRO 7527C-G2

Reviews:

Related manuals for WORKABOUT PRO 7527C-G2

Brands by name

Popular brands