Psion Teklogix WORKABOUT PRO 7527C-G2, User Manual

Page: 399 / 446

Appendix D: Bar Code Settings
EAN 8
WORKABOUT PRO
3
with Windows Mobile 6.1 User Manual D -25
D.3.7 EAN 8
Enabled
Set this parameter to on to enable ““EAN 8””.
Check Digit
If you enable this parameter, a check digit is included with the decoded bar code data.
Addendum Add-on 2 And Addendum Add-on 5
An addendum is a separate bar code, supplementary to the main bar code. Enabling these
parameters defines the length of the addendum bar code to either 2 or 5 characters.
Addendum Required
When this parameter is set to on , the scanner does not accept the main bar code without an
addendum.
Addendum Separator
Addendum Separator is a space that is added between the EAN 13 bar code and the Add-on
code/Addenda. When this parameter is set to
on , the scanner does not accept the main bar
code without an addendum.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.
D.3.8 UPC A Settings
Enabled
Set this parameter to on to enable ““UPC A”” bar code scanning recognition.
Check Digit
If you enable this parameter, a check digit is included with the decoded bar code data.
Transmit Number System
If this parameter is enabled, the number system digit is transmitted with the decoded bar
code data.
Addendum Add-on 2 And Addendum Add-on 5
An addendum is a separate bar code, supplementary to the main bar code. Enabling these
parameters defines the length of the addendum bar code to either 2 or 5 characters.