Chapter 3: Get To Know WORKABOUT PRO
3
Switching the Hand-Held On and Off
40
WORKABOUT PRO
3
with Windows Mobile 6.1 User Manual
It can take up to 4 hours to charge a battery. The WORKABOUT PRO
3
intelligent charging
system protects the battery from over-charging by terminating the charge process when the
battery is at maximum capacity.
3.3
Switching the Hand-Held On and Off
Switching On the WORKABOUT PRO
3
•
Press and hold down the
Power
button for at least two seconds.
•
When the LED flashes green, release the
Power
button.
The startup
Today
screen is displayed.
Switching Off the WORKABOUT PRO
3
(Suspend)
To switch off the WORKABOUT PRO
3
:
•
Press the
Power
button.
Note: Refer to “Monitoring the Battery and Maximizing Run Time” on page 50 for addi-
tional information about the battery.
Important: To avoid damaging the battery, chargers will not begin the charge process
until the battery temperature is between 0° C to 45 °C (32° F to 113° F).
Note: If the WORKABOUT PRO
3
is in suspend state, pressing [ENTER] ‘wakes’ the unit
from this state. The screen in which you were working before the computer entered
suspend state is displayed.
“Wakeup Keys Tab” on page 168 describes how you can assign other ‘wakeup’ keys
or enable a two-key ‘power on’ sequence.
Important: Keep in mind that turning off the WORKABOUT PRO
3
does not result in a
complete reboot; rather, the unit enters a power-saving, “suspend” state.
When the unit is turned on from suspend state, operation resumes within a
few seconds.
Summary of Contents for WORKABOUT PRO 7527C-G2
