Psion Teklogix 9160 G2, User Manual, Page: 72 / 436

Chapter 5: Configuring Basic Settings
Review / Describe The Access Point
48 Psion Teklogix 9160 G2 Wireless Gateway User Manual
5.2 Review / Describe The Access Point
Table 5.1 Basic Settings Screen Options
Field Description
IP Address
Shows IP address assigned to this access point. This field is not editable because the IP address is already
assigned (either via DHCP, or statically through the Ethernet (wired) settings as described in “Guest Interface
Settings” on page 143).
MAC Address Shows the MAC address of the access point.
A MAC address is a permanent, unique hardware address for any device that represents an interface to the
network. The MAC address is assigned by the manufacturer. You cannot change the MAC address. It is pro-
vided here for informational purposes as a unique identifier for an interface.
The address shown here is the MAC address for the bridge (
br0
). This is the address by which the AP is
known externally to other networks.
To see MAC addresses for Guest and Internal interfaces on the AP, see the Status, Interfaces tab.
Firmware Version Version information about the firmware currently installed on the access point.
As new versions of the 9160 G2 Wireless Gateway firmware become available, you can upgrade the firm-
ware on your access points to take advantages of new features and enhancements.
For instructions on how to upgrade the firmware, see “Upgrading The Firmware” on page 317.