manualshive.com logo in svg

Psion Teklogix 9160 G2, User Manual, Page: 339 / 436

Share
Download
Psion Teklogix 9160 G2 User Manual Download Page 339

Chapter 26: Back Up & Restore Configuration

Navigating To The AP’s Configuration Settings

Psion Teklogix 9160 G2 Wireless Gateway User Manual

315

You can save a copy of the current settings on the 9160 G2 Wireless Gateway to a backup 
configuration file. The backup file can be used at a later date to restore the access point to 
the previously saved configuration.

26.1

Navigating To The AP’s Configuration Settings

To manage the configuration of an access point, navigate to the

 Maintenance > Configura-

tion 

tab and use the interface as described below.

Figure 26.1 Overview Of AP Configuration

Summary of Contents for 9160 G2





















































































































































































































































































































































































































































Reviews:

No comments