Psion Teklogix 9160 G2, User Manual, Page: 310 / 436

Chapter 23: Mini-Controller Configuration
5250 Emulation
286 Psion Teklogix 9160 G2 Wireless Gateway User Manual
Local IP Address to Bind
This parameter contains the IP address of the network adaptor from which the first mobile
computer will connect on outbound telnet sessions.
First Terminal Listen Port
This parameter specifies the first port number at which the 9160 G2 will listen for telnet
connection requests to the mobile computers. To
enable this parameter, the value must be a
minimum of 1024 . To disable the listen port, the value must be 0 .
The default value is 0 (disabled).
Actively Negotiate with Host
If this parameter is enabled, the 9160 G2 starts negotiations with the host during setup of the
telnet connection. Not recommended for most hosts.
Auto-telnet
This parameter enables you to disable or enable automatic connection of telnet sessions
from mobile computers to this host.
The choices provided are:
Disable and Auto-telnet . The default value is Disable .
When Auto-telnet is disabled , telnet sessions from the mobile computers to the host must be
initiated manually from the mobile computers.
When
Auto-telnet is enabled , the 9160 G2 initiates one telnet session from each mobile
computer whose terminal number is mapped to this host. Additional telnet sessions may be
initiated from each mobile computer to the host, but they must be initiated manually.
When
Auto-telnet is enabled , the 9160 G2 will automatically telnet to the host, both on
startup and when the session is closed.
Note: Auto-telnet sessions are only initiated for mobile computers which are “online”
(turned on and operating properly on the Psion Teklogix RF network).
Auto-telnet Host
This parameter contains the host name or IP address for the host to which the 9160 G2 con-
nects Auto-telnet sessions.
Note: A host name placed in this textbox must be “resolvable” by the 9160 G2: the 9160 G2
must be able to obtain an IP address for it. For example, the host name may corre-
spond to an entry in the 9160 G2 host table, or the 9160 G2 may be able to query a