Psion Teklogix 9160 G2, User Manual, Page: 101 / 436

Chapter 8: Channel Management
Configuring And Viewing Channel Management Settings
Psion Teklogix 9160 G2 Wireless Gateway User Manual 77
With automated channel management, APs in the cluster are automatically re-assigned to
non-interfering channels as shown in 8.3.
Figure 8.3 With Channel Management Enabled
8.3 Configuring And Viewing Channel Management Settings
The Channel Management page shows previous, current, and planned channel assignments
for clustered access points. By default, automatic channel assignment is disabled. You can
start channel management to optimize channel usage across the cluster on a scheduled
interval.
From this page, you can view channel assignments for all APs in the cluster, stop/start auto-
matic channel management, and manually “update” the current channel map (APs to
channels). On a manual update, the Channel Manager will assess channel usage and, if nec-
essary, re-assign APs to new channels to reduce interference based on the current Advanced
Settings.
By using the Advanced settings you can modify the interference reduction potential that
triggers channel re-assignment, change the schedule for automatic updates, and re-configure
the channel set used for assignments.
The following sections describe how to configure and use channel management on your
network:
•
“Stopping/Starting Automatic Channel Assignment” on page 78.
• “Viewing Current Channel Assignments And Setting Locks” on page 78.
• “Update Current Channel Settings (Manual)” on page 79.
AP2
Channel 6
(802.11b)
AP1
Channel 1
(802.11b)
Channel 1
(802.11b)
AP4
AP3
Channel 11
(802.11b)
AP5
Channel 6
(802.11b)
Client Station
Client Station