Psion Teklogix 9160 G2, User Manual, Page: 318 / 436

Chapter 23: Mini-Controller Configuration
ANSI Emulation
294 Psion Teklogix 9160 G2 Wireless Gateway User Manual
Local IP Address to Bind
This parameter specifies the IP address of the 9160 G2 interface that connects to this host. It
is used along with the local port numbers to create a unique socket for each terminal session.
First Terminal Listen Port
This parameter specifies the first port number at which the 9160 G2 will listen for telnet
connection requests to the mobile computers. To
enable this parameter, the value must be a
minimum of 1024 . To disable the listen port, the value must be 0 .
The default value is 0 (disabled).
TCP Session Request Key
This parameter contains the decimal ASCII character code of the character which will
prompt the mobile computer to request a new ANSI terminal session. The range is
0 to 255 ,
with a default value of 1 .
Session Cycle Key
This parameter contains the decimal ASCII character code of the character which will
prompt the mobile computer to display the next ANSI terminal session. The range is
0 to
255 , with a default value of 2 .
Last Active Session Key
This parameter contains the decimal ASCII character code of the character which will
prompt the mobile computer to display the last ANSI terminal session. The range is
0 to
255 , with a default value of 5 .