Psion Teklogix 9160 G2, User Manual, Page: 104 / 436

Chapter 8: Channel Management
Configuring Advanced Settings (Customizing/Scheduling Channel Plans)
80 Psion Teklogix 9160 G2 Wireless Gateway User Manual
These defaults are designed to satisfy most scenarios where you would need to implement
channel management.
You can use
Advanced Settings to modify the interference reduction potential that triggers
channel re-assignment, change the schedule for automatic updates, and re-configure the
channel set used for assignments.
Table 8.3 Advanced Settings
Field Description
Advanced Click the “Advanced” toggle to show / hide display settings that modify timing and details of
the channel planning algorithm. By default, these settings are
hidden .
Change channels if interfer-
ence is reduced by at least__
Specify the minimum percentage of interference reduction a proposed plan must achieve in
order to be applied. The default is
25 percent.
Use the drop-down menu to choose percentages ranging from 25% to 75%.
This setting lets you set a gating factor for channel re-assignment so that the network is not
continually disrupted for minimal gains in efficiency.
For example, if channel interference must be reduced by 75%, and the proposed channel
assignments will only reduce interference by 30%, then channels will not be re-assigned.
However; if you re-set the minimal channel interference benefit to 25% and click
Update ,
the proposed channel plan will be implemented and channels re-assigned as needed.
Determine if there is better set
of channel settings every__
Use the drop-down menu to specify the schedule for automated updates.
A range of intervals is provided, from “1 Minute” to “6 Months”. The default is “ 1 Hour ”
(channel usage re-assessed and the resulting channel plan applied every hour).
Use these channels when
applying channel assignments
Choose a set of non-interfering channels on a particular band (“b/g” or “a”). The choices are:
• b/g channels 1-6-11
• b/g channels 1-4-8-11
• a
IEEE
802.11b / 802.11g modes (802.11 b/g) support use of channels 1 through 11. For the
“b/g” radio band, the classic set of non-interfering channels is 1, 6, 11.
Channels 1, 4, 8, 11 produce minimal overlap.
IEEE 802.11a mode supports a larger set of non-consecutive channels (36, 40, 44, 48, 52,
56, 60, 64, 149, 153, 157, 161, 165). All “a” band channels are non-interfering.