Psion Teklogix 9160 G2, User Manual, Page: 401 / 436

Appendix D: Glossary
Bridge
Psion Teklogix 9160 G2 Wireless Gateway User Manual D -51
• The Basic Rate Set is a bitmap that lists the rates that the WLAN supports.
• The optional Parameter Sets indicates features of the specific signalling methods in use
(such as frequency hopping spread spectrum, direct sequence spread spectrum, etc.).
• The optional Traffic Indication Map (TIM) identifies stations, using power saving
mode, that have data frames queued for them.
Bridge
A connection between two local area networks ( LAN s) using the same protocol, such as
Ethernet or IEEE 802.1x .
Broadcast
A Broadcast sends the same message at the same time to everyone. In wireless networks,
broadcast usually refers to an interaction in which the access point sends data traffic in the
form of
IEEE 802.1x Frame s to all client stations on the network.
Some wireless security modes distinguish between how unicast, multicast, and broadcast
frames are encrypted or whether they are encrypted.
See also Unicast and Multicast .
Broadcast Address
See IP Address .
BSS
A basic service set (BSS) is an Infrastructure Mode Wireless Networking Framework with
a single access point. Also see extended service set ( ESS ) and independent basic service set
( IBSS ).
BSSID
In Infrastructure Mode , the Basic Service Set Identifier (BSSID) is the 48-bit MAC address
of the wireless interface of the Access Point .