Psion Teklogix 9160 G2, User Manual, Page: 19 / 436

Chapter : Approvals and Safety Summary
Psion Teklogix 9160 G2 Wireless Gateway User Manual xv
occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which is found by turning the equipment off and on, the user is en-
couraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
• Increase the separation between the equipment or devices.
• Connect the equipment to an outlet other than the receiver's.
• Consult a dealer or an experienced radio/TV technician for assistance.
Important: Any change or modification to the product not expressly approved by Psion
Teklogix could void the user's authority to operate the device.
RF Radiation Exposure Statement
To comply with the FCC and ANSI C95.1 RF exposure limits, the antenna(s) for this device
must comply with the following:
•
All Access Point antennas must operate with a separation distance of at least 25 cm (9.8
in.) from all persons using the cable provided, and must not be co-located or operating
in conjunction with any other antenna or transmitter.
• The Gabriel dish antenna (P/N 9002006) requires a minimum separation distance of
63.2 cm (24.9 in.).
Note: Dual antennas used for diversity operation are not considered co-located.
Industry Canada (IC) Department Of Communications Notice
This Class B digital apparatus complies with Canadian ICES-003 and RSS-210.
“To prevent radio interference to the licensed service, this device is intended to be operated
indoors and away from windows to provide maximum shielding. Equipment (or its transmit
antenna) that is installed outdoors is subject to licensing.”
Cet appareil numérique de la classe B est conforme à la norme NMB-003 et CNR-210 du
Canada. “Pour empêcher que cet appareil cause du brouillage au service faisant l'objet d'une
licence, il doit être utilisé à l'intérieur et devrait être placé loin des fenêtres afin de fournir un
écran de blindage maximal. Si le matériel (ou son antenne d'émission) est installé à l'exté-
rieur, il doit faire l'objet d'une licence.”
Safety Approvals
CSA, NRTL/C and CB.