Psion Teklogix 9160 G2, User Manual, Page: 296 / 436

Chapter 23: Mini-Controller Configuration
3274 Emulation
272 Psion Teklogix 9160 G2 Wireless Gateway User Manual
Send IAC Break as an Attention Key
If this parameter is enabled, the 9160 G2 sends the IAC Break request to the host as a 3274
Attention key.
Auto-telnet
This parameter enables you to disable or enable automatic connection of telnet sessions
from mobile computers to this host.
The choices provided are:
Disable and Auto-telnet . The default value is Disable .
When Auto-telnet is disabled , telnet sessions from the mobile computers to the host must be
initiated manually from the mobile computers.
When
Auto-telnet is enabled , the 9160 G2 initiates one telnet session from each mobile
computer whose terminal number is mapped to this host. Additional telnet sessions may be
initiated from each mobile computer to the host, but they must be initiated manually.
When
Auto-telnet is enabled , the 9160 G2 will automatically telnet to the host, both on
startup and when the session is closed.
Note: Auto-telnet sessions are only initiated for mobile computers which are “online”
(turned on and operating properly on the Psion Teklogix RF network).
Auto-telnet Host
This parameter contains the host name or IP address for the host to which the 9160 G2 con-
nects Auto-telnet sessions.
Note: A host name placed in this textbox must be “resolvable” by the 9160 G2: the 9160 G2
must be able to obtain an IP address for it. For example, the host name may corre-
spond to an entry in the 9160 G2 host table, or the 9160 G2 may be able to query a
domain-name server.
Any host name which can be used at the mobile computer’s TCP> prompt may be
used here.
Auto-telnet Without User Action
If this is enabled, the controller will immediately open a connection to the host for each
mobile computer that is initialized, without the user pressing the [ENTER] key.