Psion Teklogix 9160 G2, User Manual, Page: 154 / 436

Chapter 11: Maintenance And Monitoring
Neighboring Access Points
130 Psion Teklogix 9160 G2 Wireless Gateway User Manual
Figure 11.5 Status Of Neighboring Access Points
Information provided on neighboring access points is described in Table 11.5.
Table 11.5 Neighboring Access Point Statistics
Field Description
MAC
Shows the MAC address of the neighboring access point.
A MAC address is a hardware address that uniquely identifies each node of a network.
Radio Two-Radio APs
If the access point that is “doing the detecting” of neighboring APs is a two-radio access point, the Radio field is
included.
The Radio field indicates which radio the neighboring AP was detected on:
• wlan0 (Radio One)
• wlan1 (Radio Two)
One-Radio APs
This field is not included on the Neighboring Access Points pages of one-radio access points.
Beacon Int.
Shows the Beacon interval being used by this access point.
Beacon frames are transmitted by an access point at regular intervals to announce the existence of the wireless
network. The default behaviour is to send a beacon frame once every
100 milliseconds (or 10 per second).
The Beacon Interval is set on the Manage > 802.11 Advanced Settings tab page. (See Chapter 16: “Configuring
802.11 Radio Settings”.)
Capability
A hexadecimal number which, when converted to binary, indicates each IEEE 802.11 feature or functionality
and whether it is “on” or “off” on this access point.