Psion Teklogix 9160 G2, User Manual, Page: 375 / 436

Appendix B: Security Settings on Wireless Clients/RADIUS Server
WPA/WPA2 Enterprise (RADIUS) Client Using EAP/PEAP
Psion Teklogix 9160 G2 Wireless Gateway User Manual B -25
1. Configure the following settings on the Association and Authentication tabs on the
Network Properties dialog.
2. Configure this setting on the Authentication tab.
3. Click Properties to bring up the Protected EAP Properties dialog and configure the
following settings.
4. Click Configure to bring up the EAP MSCHAP v2 Properties dialog.
On this dialog, disable (click to uncheck) the option to Automatically use my Windows
logon name . . . etc. so that upon logon you will be prompted for user name and
password.
Click
OK on all dialogs (starting with the EAP MSCHAP v2 Properties dialog) to close
and save your changes.
Table B.10 Association Settings
Network Authentication
WPA
Data Encryption TKIP or AES depending on how this option is configured on the access point.
Note: When the Cipher Suite on the access point is set to Both , then TKIP clients
with a valid TKIP key and AES clients with a valid CCMP (AES) key can asso-
ciate with the access point. For more information, see Online Help on the
access point.
Table B.11 Authentication Settings
EAP Type Choose Protected EAP (PEAP)
Table B.12 Protected EAP Properties Settings
Validate Server Certificate
Disable this option (click to uncheck the box).
Note: This example assumes you are using the Built-in Authentication server on the
AP. If you are setting up EAP/PEAP on a client of an AP that is using an exter-
nal RADIUS server, you might certificate validation and choose a certificate,
depending on your infrastructure.
Select Authentication Method
Choose Secured password (EAP-MSCHAP v2 ).