manualshive.com logo in svg

Proxim ORiNOCO AP-8000, User Manual, Page: 97 / 178

Share
Download
Proxim ORiNOCO AP-8000 User Manual Download Page 97

Using Web Interface to Manage the Access Point

AP-8000 User Guide

97

Figure 6-58 SNTP Configuration

2. In the SNTP page, do the following:

•

Enable SNTP Status

: Select Enable SNTP status checkbox to enable SNTP functionality. The following 

parameters are configurable only when SNTP is enabled.
•

Primary Server IP Address/Domain Name:

 If SNTP is enabled, enter the host name or IP address of the 

primary SNTP server.

•

Secondary Server IP Address/Domain Name:

 If SNTP is enabled, enter the host name or IP address of the 

secondary SNTP server.

•

Time Zone:

 If SNTP is enabled, select the appropriate time zone from the drop-down box.

•

Day Light Saving Time:

 When SNTP is enabled, select the Day Light Saving Time from the drop-down box

3. Click 

Ok

.

NOTE:

If SNTP Status is disabled, the user cannot configure the SNTP parameters. The following message is displayed 
while trying to configure SNTP parameters with SNTP status disabled.

Figure 6-59 SNTP Status - Disabled

Interface Statistics

The various Interface Statistics features supported by AP are detailed in the following sections.

•

Ethernet

•

Wireless

Ethernet

To view Ethernet Statistics,

1. Navigate to 

Monitor > Interface Statistics > Ethernet

. This 

Ethernet Statistics

 page appears.

Summary of Contents for ORiNOCO AP-8000



















































































































































































Reviews:

No comments