manualshive.com logo in svg

Proxim ORiNOCO AP-8000, User Manual, Page: 115 / 178

Share
Download
Proxim ORiNOCO AP-8000 User Manual Download Page 115

Using CLI to Manage the Access Point

AP-8000 User Guide

115

Configuring the Device Using CLI Commands

The Command Line Interface (CLI) is divided into different command modes. Each command mode has its own set of 
commands that manage the network operations. The commands that you use also depends on the mode that you are in. 

User Name and Password Command

When you start a session, you are in 

User Exec 

mode with limited access to commands. To enter into the privileged 

mode, provide your Username and Password along with the 

enable

 command.

Username: admin
Password: public
System Name>?
Possible completions:
disable  Turn off privileged commands
enable   Turn on privileged commands
exit     Exit from EXEC
show     Show

System Name>enable
System Name#?
Possible completions:
configure Enter configuration mode
disable   Turn off privileged commands
enable    Turn on privileged commands
exit      Exit from EXEC
show      Show
System Name#

NOTE:

 The username and password are case-sensitive. If you enter wrong Password, then a message is displayed 
stating that the password is incorrect.

When you enter “

show” 

command at the CLI Command prompt, this will list the following features that you can configure 

or view:

Show Command - Tree Structure 

Show Command - Tree Structure for Device Configuration

# show ?
   ---configure ? 
            ---filtering ?
                   ---advanced-filter-table
                   ---global-filter-flag                  
                   ---intra-bss
                   ---protocol-filter ?
                                ---filter-control
                                ---filter-type
                                ---table
                   ---static-mac-addr-filter ?
                   ---tcp-udp-filter
                                ---port-filter-ctrl
                                ---table
            --interface
                   ---ethernet
                   ---wireless ?
                                ---properties-table
                                ---properties-11n-table

Summary of Contents for ORiNOCO AP-8000



















































































































































































Reviews:

No comments