manualshive.com logo in svg

Proxim ORiNOCO AP-8000, User Manual, Page: 19 / 178

Share
Download
Proxim ORiNOCO AP-8000 User Manual Download Page 19

Installation and Initialization

AP-8000 User Guide

19

NOTE:

When in operational status, the wireless LEDs will be steady Green. The wireless LEDs would blink Green when 
the wireless traffic is being transmitted or received.

Initialization

This section details on how to initialize the AP device using ScanTool

.

ScanTool

ScanTool is a software utility that runs on Microsoft’s Windows machines and is included in the installation CD-ROM 
within the device package. Using ScanTool, the IP address assigned to the device can be obtained and, if required, can 
be changed to the IP address that is appropriate on the network. The ScanTool automatically detects the devices 
installed in the network segment, regardless of IP address, and enables the configuration of each device’s IP settings.

To access the HTTP interface and configure the device, the device must be assigned an IP address, which is valid on its 
Ethernet network. By default, the AP is configured to obtain an IP address automatically from the 

Dynamic Host 

Configuration Protocol (DHCP) 

server during the boot-up. If your network contains a DHCP server, you can run the 

ScanTool to find the IP address of the device. If your network does not contain a DHCP server, the Access Point’s IP 
address defaults to 169.254.128.132 and the device starts with a dynamic IP address. 

Set the IP Address of the AP device using ScanTool

To set the IP address of the AP device using ScanTool,

1. Power up, reboot, or reset the device.
2. Double-click the ScanTool icon on the Windows desktop to launch the program (if the program is not already running). 

If the icon is not on your desktop, click 

Start > Programs > ORiNOCO > AP-8000 > Xtras > ScanTool.

3. If your computer has more than one network adapter installed, you will be prompted to select the adapter that you 

want ScanTool to use. You can use either an Ethernet or a Wireless Adaptor. Select an adapter and click 

OK

. The 

Scan List screen

 appears.

Figure 2-3 ScanTool

4. ScanTool scans the subnet and displays a list of detected devices in the Scan List. You can change your adapter 

setting at any time by clicking the 

Select Adapter

 button on the 

Scan List

 screen.

5. Locate the MAC address of the AP you want to initialize from the Scan List.

NOTE:

If your Access Point does not appear in the Scan List, click 

Rescan

 in the 

ScanList

 screen to update. If the 

unit still does not appear in the list, see 

Troubleshooting

 for suggestions. Note that after rebooting the device, 

it may take up to five minutes for the unit to appear in the Scan List.

6. Do one of the following:

Summary of Contents for ORiNOCO AP-8000



















































































































































































Reviews:

No comments