manualshive.com logo in svg

Proxim ORiNOCO AP-8000, User Manual, Page: 84 / 178

Share
Download
Proxim ORiNOCO AP-8000 User Manual Download Page 84

Using Web Interface to Manage the Access Point

AP-8000 User Guide

84

Figure 6-36  TCP/UDP Port Filter Page

2. Enable the filter control by selecting 

Enable

 from the 

Filter Control 

drop-down box and click 

Ok

.

3. To add new entries, click 

Add 

under the TCP/UDP Filter table. The 

TCP/UDP Port Filter Add Row

 page appears.

.

Figure 6-37  TCP/UDP Port Filter Table - Add Entries

4. Enter the Protocol Name to filter.
5. Set the destination 

Port Number

 (a value between 0 and 65535) to filter. See the IANA Web site at 

http://www.iana.org/assignments/port-numbers for a list of assigned port numbers and their descriptions.

6. Set the 

Port Type

 for the protocol: 

TCP, UDP, or both (TCP/UDP

).

7. Set the 

Filter

 

Interface

 to filter:

•

Only Ethernet

•

Only  Wireless

•

All Interfaces

8. Set the 

Table Status

:

•

Enable

•

Disable

9. Click 

Add

.

NOTE:

The maximum number of TCP/UDP Port Filters that can be added are 64.

Summary of Contents for ORiNOCO AP-8000



















































































































































































Reviews:

No comments