Proxim ORiNOCO AP-8000 User Manual Download Page 68

Page: 68 / 178

Using Web Interface to Manage the Access Point

AP-8000 User Guide

Figure 6-12 Ethernet Page

2. Configure the following parameters.

•

MAC Address

: Represents the MAC address of the device.

•

Speed

: Represents the speed of the Ethernet interface.

•

Transmit Mode:

Represents the Transmit Mode as either Half Duplex or Full Duplex.

•

TxMode And Speed:

Select the Speed and Transmission Mode for the Ethernet interface from the drop-down

box.

3. Click

Ok.

Security

The various Security features supported by AP are described in the following sections:

•

Wireless Security

•

RADIUS

•

MAC Access Control

Wireless Security

To configure Wireless Security parameters,

1. Navigate to

Configuration > Security > Wireless Security.

The

Wireless Security Configuration

page appears.

Figure 6-13 Wireless Security Configuration Page

2. To edit an existing entry, click the

Edit

icon. The

Wireless Security Edit Row

page appears.

Summary of Contents for ORiNOCO AP-8000



















































































































































































Search results

Summary of Contents for ORiNOCO AP-8000

Reviews:

Proxim ORiNOCO AP-8000, User Manual, Page: 68 / 178

Search results

Summary of Contents for ORiNOCO AP-8000

Reviews: