Using Web Interface to Manage the Access Point
AP-8000 User Guide
72
•
Server Port
: Enter the port number which the AP and the server will use to communicate. By default, RADIUS
Authentication/Accounting servers communicate on ports 1812/1813.
•
Shared Secret
: Enter the password shared by the RADIUS server and the AP. The password can be a maximum
of 65 characters. The default password is “public.”
•
Entry Status
: Select Enable to enable RADIUS server, if required.
•
Click
OK
.
MAC Access Control
To configure MAC Access Control parameters,
1. Click
Configuration > Security > MAC ACL.
The
MAC Access Control
page appears.
Figure 6-20 MAC Access Control Page
2. Select the
Operation Type
and click
Ok
.
NOTE:
Based on the Operation type, you can allow/deny the association of the MAC ACL profile to an SSID.
3. To add new entries for authorized wireless stations that can register with the unit and access the network, click
Add.
The
MAC ACL Add Row
page appears.
Figure 6-21 MAC ACL Add Row Page
4. Enter the
MAC Address
for the stations,
Comment
if any and
Entry Status,
and then click
Add
.
NOTE:
The maximum number of MAC addresses that can be added is 1024.
QoS
The various QoS features supported by AP are described in the following sections:
•
•