manualshive.com logo in svg

Proware SB-3164E-G1S3, User Manual

Share
Download
Proware SB-3164E-G1S3 User Manual Download Page 88

 

iSCSI GbE to SAS/SATA II RAID Subsystem

 

 

88 

User Manual 

 

4.7   Support Microsoft MPIO and MC/S 

 

MPIO

 (Multi-Path Input/Output) and 

MC/S

 (Multiple Connections per Session)  use 

multiple physical paths to create logical "paths" between the server and the storage 
device. In case one or more of these components fail, causing the path to fail, multi-
path logic uses an alternate path for I/O. So applications can still access the data. 

 

Microsoft iSCSI initiator supports multi-path. Please follow the steps to use MPIO 
feature. 

 

1.

 

A host with dual LAN ports connects to the iSCSI RAID system. 

2.

 

Create a RG/VD and attach this VD to the host. 

3.

 

When installing 

“Microsoft iSCSI initiator”

, please install MPIO driver at the 

same time. 

4.

 

Logon to target separately on each port. When logon to target, check 

“Enable 

multi-path”

. 

5.

 

MPIO mode can be selected on Targets 

Æ

 Details 

Æ

 Devices 

Æ

 Advanced in 

Microsoft iSCSI initiator. 

6.

 

Rescan disk. 

7.

 

There will be one disk running MPIO.  

 
 
 

 
 

 
 

 
 

 
 
 

 
 

 
 

 
 

 
 
 

 
 

 
 

 
 

 
 
 

 
 

Summary of Contents for SB-3164E-G1S3











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands