manualshive.com logo in svg

Proware SB-3164E-G1S3, User Manual

Share
Download
Proware SB-3164E-G1S3 User Manual Download Page 15

iSCSI GbE to SAS/SATA II RAID Subsystem

 

 

User Manual 

15 

 

2.3.2   Rear View 

 
 
 

 

 

 

 
 

 
 

1. Power Supply Alarm Reset button 

You can push the power supply reset button to stop the power supply buzzer alarm. 

 
2. Uninterrupted Power Supply (UPS) Port (APC Smart UPS only) 

The subsystem may come with an optional UPS port allowing you to connect an APC 

Smart UPS device. Connect the cable from the UPS device to the UPS port located at 
the rear of the subsystem. This will automatically allow the subsystem to use the 

functions and features of the UPS. 

 
3. R-Link Port: Remote Link through RJ-45 Ethernet for remote management 

The subsystem is equipped with one 10/100 Ethernet RJ45 LAN port for remote 

configuration and monitoring. You use web browser to manage the RAID subsystem 
through Ethernet. 

 
4. LAN Ports (Gigabit) 

The subsystem is equipped with four LAN data ports for iSCSI connection. 

 
5. Monitor Port 

The subsystem is equipped with a serial monitor port allowing you to connect a PC or 
terminal. 

 

Summary of Contents for SB-3164E-G1S3











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands