iSCSI GbE to SAS/SATA II RAID Subsystem
User Manual
39
3.5.2 NIC
“NIC”
function is used to change the IP addresses of iSCSI data ports. The iSCSI RAID
subsystem has four gigabit LAN ports to transmit data. Each of them must be assigned
to one IP address in multi-homed mode unless the link aggregation or trunking mode
has been selected. If any two or more ports are set in link aggregation or trunking
mode, they will display the same IP.
IP settings:
User can change IP address by moving mouse to the gray button of LAN port, click
“IP
settings for iSCSI ports”
. There are 2 selections, DHCP (Get IP address from DHCP
server) or static IP.
Default gateway:
Default gateway can be changed by moving mouse to the gray button of LAN port,
click
“Become default gateway”
. There is only one default gateway.
MTU / Jumbo frame:
MTU
(
M
aximum
T
ransmission
U
nit) size can be enabled by moving mouse to the gray
button of LAN port, click
“Enable jumbo frame”
.
WARNING! The MTU size of network switch and HBA on host must
be enabled. Otherwise, the LAN connection will not work properly.
