iSCSI GbE to SAS/SATA II RAID Subsystem
62
User Manual
3.
Input a VD name, choose the RG when VD will be created, enter the VD
capacity, select the stripe height, block size, read/write mode, set priority,
modify Bg rate if necessary, and finally click “
”.
4.
Done. A VD has been created.
5.
Repeat steps 1 to 4 to create another VD.
Two VDs, “VD-R5-1” and “VD-R5-2”, were created from RG “RG-R5”. The size of “VD-
R5-1” is 50GB, and the size of “VD-R5-2” is 64GB. “VD-R5-1” is initializing about 86%.
There is no LUN attached.
Step 3:
Attach LUN to VD.
There are 2 methods to attach LUN to VD.
1.
In
“/ Volume configuration / Virtual disk”
, move the mouse pointer to the
gray button next to the VD number; click “Attach LUN”.
2.
In
“/ Volume configuration / Logical unit”
, click “
”.
The steps are as follows:
