Proware SB-3164E-G1S3 User Manual Download Page 52

Page: 52 / 106

iSCSI GbE to SAS/SATA II RAID Subsystem

User Manual

RG column description:

No.

Number of RAID group. The button next to the No. shows
the functions which can be executed.

Name

RAID group name.

Total(GB)

Total capacity of this RAID group.

Free(GB)

Free capacity of this RAID group.

#PD

The number of physical disks in RAID group.

#VD

The number of virtual disks in RAID group.

Status

The status of RAID group.

“Online”

the RAID group is online.

“Offline”

the RAID group is offline.

“Rebuild”

the RAID group is being rebuilt.

“Migrate”

the RAID group is being migrated.

“Scrub”

the RAID group is being scrubbed.

Health

The health of RAID group.

“Good”

the RAID group is good.

“Failed”

the hard drive is failed.

“Degraded”

the RAID group is not completed. The

reason could be lack of one disk or disk failure.

RAID

The RAID level of the RAID group.

Enclosure

RG locates on local or JBOD enclosure.

RG operations description:

Create

Create a RAID group.

Migrate

Migrate a RAID group. Please refer to next chapter for more

detail.

Activate

Activate a RAID group; it can be executed when RG status

is offline. This is for online roaming purpose.

Deactivate

Deactivate a RAID group; it can be executed when RG

status is online. This is for online roaming purpose.

Scrub

Scrub a RAID group. It does parity regeneration. It is

supported in RAID 3 / 5 / 6 / 30 / 50 / 60 only.

Summary of Contents for SB-3164E-G1S3











































































































Search results

Summary of Contents for SB-3164E-G1S3

Reviews:

Brands by name

Popular brands

Proware SB-3164E-G1S3, User Manual

Search results

Summary of Contents for SB-3164E-G1S3

Reviews:

Brands by name

Popular brands